- Product Description
-

Radar-based intelligent intrusion-prevention and proactive warning device

Front-mounted automatic obstacle-avoidance cleaning device
Product Overview
Our company’s road sweeper is converted from a China National Heavy Duty Truck Group Euro VI‑II‑compliant vehicle chassis and equipped with a high‑pressure cleaning and dust‑suppression system, a fresh‑water tank, a maintenance compartment, a waste container, a lifting mechanism, rear rotary brushes, left and right side brushes, a hydraulic system, and a dedicated electrical control system. The chassis engine supplies both driving power and power for the superstructure. The high‑pressure water pump is a domestically produced plunger pump with a brass pump head, delivering an appropriate flow rate and high pressure, with a maximum allowable pressure of 10 MPa. A large‑capacity fresh‑water tank features a low‑level alarm to prevent dry‑run damage to the high‑pressure pump. The left and right side brushes are dual‑disc designs, increasing the sweeping width. Each side brush is independently controlled, enabling various operating modes such as left‑side sweeping, right‑side sweeping, and full‑width sweeping. Operators can easily adjust the vehicle speed to ensure optimal cleaning performance under different road conditions. High‑pressure nozzles mounted at the mid‑ and rear sections of the chassis direct jets forward, providing high‑pressure washing and dust suppression on the road surface.
Our company’s road sweepers offer a range of functions, including pavement washing, street sweeping, curb cleaning, scrubbing of curbs and curb faces, and dust suppression via misting.
Our company’s road sweepers are designed for mechanized cleaning, sweeping, and dust‑suppression spraying on highways, urban roads, plazas, airports, docks, tunnels, and bridges. These vehicles are particularly well suited for cleaning road surfaces where large amounts of debris accumulate and where the particles are both sizable and heavy.
Product Features
★This next-generation road sweeper is developed based on the company’s proprietary road‑cleaning technology. It features a no‑auxiliary‑engine design and offers functions such as high‑pressure water spraying for dust suppression, vertical sweeping, and rotary sweeping for collection and transport.
★ Equipped with a high-pressure water‑spraying system that operates in mist‑blow mode, it can both suppress dust through atomization and clean surfaces with a mist‑blow jet, delivering dust‑control and cleaning performance far superior to conventional spraying systems.
★ The sweeping roller is equipped with a specially designed, next-generation nylon brush, delivering rapid cleaning performance. Compared with vacuum‑sweeping street sweepers, it offers distinct advantages such as lower noise levels and superior wear resistance.
★ No centrifugal fan, resulting in low energy consumption, reduced noise, and easy maintenance;
★ The automated control system employs an intelligent motion controller imported from Germany, ensuring safety and reliability, stable performance, and an IP67 protection rating.
★ The trash bin employs a side‑discharge design with a large discharge angle, ensuring that settled sediment and waste are fully discharged automatically.
★ The inner walls of the waste container are made of a high‑molecular‑weight material, which prevents corrosion caused by waste and extends the service life.
★The control system employs a programmable, automatic interlock protection sequence, ensuring the safety and reliability of the street sweeper’s mechanisms during operation or in the event of operator error.
Technical Specifications
Vehicle model SDZ5187TSLF Chassis model ZZ1 187K561DF1Z External dimensions (L x W x H) (mm) 8330X 2455X 3000 Total mass (kg) 18000 Trash bin capacity (L) 7m3 Water tank capacity (L) 6.5m Front sweeping disc diameter (mm) 900 Rear sweep roller diameter (mm) 800 Rear sweep roller length (mm) 1700 Cleaning width (mm) 3200 Cleaning efficiency ≥96 Large cleaning granularity 110mm High effective cleaning speed 60 Rated pressure of cleaning water (MPa) 6~10 (adjustable) Cleaning water flow rate (1/min) 25–40 (depending on engine speed) Dumpster tipping angle 2≥45°
Tags: